austenite

How To Use austenite In A Sentence

• Trip steels have a microstructure with retained austenite, ferrite and martensite.
• This soft retained austenite can accommodate impact stresses better than the harder constituents.
• Its excellent toughness is due to a fine-grained structure of tough nickel-ferrite devoid of embrittling carbide networks, which are taken into solution during tempering at 570°C to form stable austenite islands.
• It is important to limit nickel content to the level needed for control of pearlite; excess nickel increases the amount of retained austenite and lowers hardness.
• The results show that the microstructure of the alloys system is the compound of the acicular martensite and partial residual austenite. From the matrix, the composite carbides were precipitated.
• Trip steels have a microstructure with retained austenite, ferrite and martensite.
• The interface of austenite and martensite is somewhat straight.
• However, if the heating has gone above the critical very far, the austenite crystals start to grow; a very short time at an extreme temperature will cause The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
• The equilibrium diagram does not tell us what form is taken by the ferrite or cementite ejected from the austenite on cooling.
• This level of carbon also decreases the solubility of the microalloying constituents in austenite.