How To Use Crankshaft In A Sentence
-
The resulting explosions of fuel and air drive the pistons which turn the crankshaft.
-
Like in a car engine, the gas released from a manhole explosion could push on a piston and turn a crankshaft.
-
The crankshaft was a nickel chrome steel forging, machined hollow, with four crank pins set at 180 degrees to each other, and carried in three bearings lined with anti-friction metal.
A History of Aeronautics
-
Owing to its sheer size and the distribution of friction, the most likely starting point on an engine is the crankshaft, with its main and conrod bearings.
Manufacturingtalk - manufacturing industry news
-
Sizing the engine for its current displacement meant that the crankshaft lost four pounds, and could ride on smaller bearing journals.
-
D95R, badly damaged, needed a new oil pump and crankshaft.
Wild Ride
-
Engineers designed a sandwich using a second injection-molded part: A separately produced oil deflector, which is vibration-welded onto the flat section of the pan, helps to calm the oil churned by the crankshaft and balance shaft.
All DN headlines
-
From the metallic zizz of the starter motor and the first flurry of revs to the final frantic thrashings of the crankshaft, this is swansong motoring.
-
Keyed on to the crankshaft is a flanged pulley 10 in. in diameter by 3¼ in. between flanges.
Scientific American Supplement, No. 799, April 25, 1891
-
The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.
-
With a rotary engine, the crankshaft is fixed, while the cylinders, crankcase and all the other bits rotate around it.
-
These include a raised capacity, new cylinder block, pistons and crankshaft.
-
When a cylinder fires, the piston rod is at an angle and can immediately turn the crankshaft via the cam at the end of the pivoting arm.
-
This is Aston Martin's own engine, but has been re-engineered for the DB9, with a new crankshaft, cams, manifold, and engine-management system for more midrange torque.
-
This rigid, high-strength, shock-resisting material is used for diesel crankshafts, gears and machine columns.
-
Pry the crankshaft forward , position the dial indicator to zero.
-
The connecting rod connects the piston to the crankshaft.
-
Kalyani's Bharat Forge - which supplies high value added products like machined crankshafts and connecting rods - already has a niche in the Chinese market.
-
The crankshaft was the most highly stressed part of the entire
The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
-
Ditto air resistance (2.6 percent); friction between the wheels, their bearings and the road (4.2 percent); braking (5.8 percent); and the "driveline," which includes the transmission and all the other parts of the car that transmit the force of the crankshaft to the wheels.
GOOD
-
The starter motor spun the crankshaft through a few revolutions, easily resisting the cold, gluey oil that clings to the bearings and cylinder walls.
-
However, it differs in revised crankshaft and pistons, an increased cylinder capacity and larger intake and exhaust ports.
-
However, it differs in revised crankshaft and pistons, an increased cylinder capacity and larger intake and exhaust ports.
-
Only a few parts come from Japan, such as engine blocks and crankshafts for the gasoline engine.
-
Japanese car manufacturers, for example, already figure out where every tire, rim, and crankshaft will go after their cars die.
-
The ‘crankshaft’ style release pattern may result from a recoil artefact causing apparent age variations in the finer grained portions of this whole rock sample.
-
The Manley connecting rods and pistons swing on a Callies crankshaft and provide a compression ratio of 15 to 1.
-
The camshaft rotates in phase with the crankshaft, but at half its speed.
-
The crankshaft and connecting rods are visible through the sides of the engine block.
-
She calls the head gillie on her mobile phone and tells him it is a broken crankshaft.
Times, Sunday Times
-
Mladin's team contended that the crankshaft was a production crankshaft and the same as the crankshaft AMA Pro Racing inspected when Mladin finished second at Auto Club Speedway earlier this season.
Roadracingworld.com
-
An example of this can be cast iron crankshafts in large stationary diesel engines.
-
This paper presents a nonlinear autoregressive exogenous (NARX)model to approximate dynamics of crankshaft speed with the mass of the idle feeding fuel and the spark advance.
-
These include a raised capacity, new cylinder block, pistons and crankshaft.
-
Now bedplate and crankshaft have been delivered to the vessel and two engine manufacturer's representatives were, as of 25/10, carrying out the engine rebuild.
-
Descending the reef again, I came across the engine block and crankshaft.
-
We ended up blowing our crankshaft in the engine...
Steven Crandell: "We're Destroying the Most Amazing Thing in Our Lives" -- Interview With Polar Photographer Paul Nicklen
-
It has no crankshaft, camshafts, oil pump or valvetrain.
-
Eventually the plane came back to life and he and his co-pilot were able to land it on pontoons, but then they had to wait a month on the rapidly deteriorating summer ice for a new crankshaft.
Steven Crandell: "We're Destroying the Most Amazing Thing in Our Lives" -- Interview With Polar Photographer Paul Nicklen
-
Behind the engine, the crankshaft links to the propeller shaft through the thrust-bearing.
-
A timing belt or timing chain links the crankshaft to the camshaft so that the valves are in sync with the pistons.
-
I'm also not a fan of counterweighted flywheel flanges on crankshafts.
-
He grabbed the handle that would move the crankshaft and leave another area accessible.
T2©: RISING STORM
-
With regard to the design feasibility and the specific challenges for the conrod and the expected friction potential, the technical effort required to implement rolling bearings as the main bearings of the crankshaft is less than with conrod bearings.
Manufacturingtalk - manufacturing industry news
-
The all-aluminum 5.6 liter engine features cast-iron cylinder liners, graphite-coated pistons, a microfinished forged-steel crankshaft, chain-driven dual overhead cams, and a structural aluminum oil pan.
-
The uses of medium carbon-manganese steels include shafts, axles, gears, crankshafts, couplings and forgings.
-
Automobile and motorcycle spare parts - crankshafts, connecting rods, shafts, power steering shafts.
-
The new engine has a forged steal crankshaft with revised counterweights to handle the greater weight of the higher compression pistons.
-
The crankshaft also has a viscous type torsional vibration damper.
-
This paper presents a nonlinear autoregressive exogenous (NARX)model to approximate dynamics of crankshaft speed with the mass of the idle feeding fuel and the spark advance.
-
This is particularly important at idle when there is no splash oiling from the connecting rods and crankshaft to lubricate the cam and lifter contact points.
-
The camshaft rotates in phase with the crankshaft, but at half its speed.
-
Attached to the crankshaft is a set of titanium connecting rods and forged aluminum pistons, which, when combined with the cylinder heads, delivers a 9.1: 1 compression ratio.
Top Speed
-
The crankshaft is forged steel and induction hardened.
-
The uses of medium carbon-manganese steels include shafts, axles, gears, crankshafts, couplings and forgings.
-
The engines had twin overhead camshafts which were gear driven via a train of gears coming from the rear of the crankshaft.
-
This approach is typically used in manufacturing camshafts, crankshafts, valves, pistons - just about any machined part that goes into an automobile engine these days.
-
Also known as crankshaft dampers, these devices dwell in the harsh environment of a vehicle's engine and serve to reduce the noise and vibration of a vehicle.
-
Fuel is transformed into energy that pushes down on a piston that turns a crankshaft that turns a drive shaft.
-
The cylinders of Millet rotated with the wheel and its crankshaft constituted the rear axle.
-
Plans are to produce 12 000 crankshafts daily for four-cylinder diesel engines.
-
A timing belt or timing chain links the crankshaft to the camshaft so that the valves are in sync with the pistons.
-
I met crankshaft grinders and engine assemblers who could discuss the ROI of their machine tools.
-
All moving parts, apart from the plain-bearing crankshaft, use needle roller bearings to help it rev freely.
-
He takes one look at the luscious lady and starts getting his crankshaft in a conundrum.
-
They rebuild engines and transmissions, work on air conditioning units, repair hydraulics, turn crankshafts, cut keyways, fabricate metal truck boxes, and even extend truck frames.
-
If the bearings that allow the crankshaft to turn freely are worn out, the crankshaft cannot turn so the engine cannot run.
-
Oil is not mixed with the gasoline but remains completely separate in the crankcase, where it lubricates the crankshaft, connecting rods and cylinder walls.
-
The cylinder block has cast-in iron liners, and a one-piece aluminum crankshaft carrier with ferrous-carbon bearing cap inserts.
-
It comes from some of the critical wear areas; for example, the liner of the piston area, the crankshaft, or the camshaft.
-
With each stroke of his crankshaft, my carburettor purred.
Regret
-
Applying this principle to crankshafts, if the counterweights aren't in the right place, the balancing job is much more difficult and ultimately requires more weight to achieve a balanced state.
-
The subroutine will bring in our know-how on vehicle drivelines, or transmissions, or crankshafts, for example, and provide an interface to give our customers a tool they can use.
-
The crankcase was ribbed for strength while the crankshaft was carried on five main hearings.
-
This rigid, high-strength, shock-resisting material is used for diesel crankshafts, gears and machine columns.
-
The aft end of the crankshaft connects to the propeller shaft through the thrust bearing.
-
Once again, the prop is used to rotate the engine and make sure that those points open and close at the correct timing marks on the crankshaft.
-
It was a component for a vibration damper on the crankshaft for its 3-liter engine.
-
Older engines used a camshaft located in the sump near the crankshaft.
-
She calls the head gillie on her mobile phone and tells him it is a broken crankshaft.
Times, Sunday Times
-
When a cylinder fires, the piston rod is at an angle and can immediately turn the crankshaft via the cam at the end of the pivoting arm.
-
I met crankshaft grinders and engine assemblers who could discuss the ROI of their machine tools.
-
The resulting explosions of fuel and air drive the pistons which turn the crankshaft.
-
A timing belt or timing chain links the crankshaft to the camshaft so that the valves are in sync with the pistons.
-
The front end of the crankshaft features a damper designed to absorb idiosyncratic vibrations and minimize the transmission of vibration to the belt drive.
-
Complete jackshaft chain set new timing chain set contains the following 1 timing chain2 camshaft sprockets 1 crankshaft sproket4 timing guide rails1 timing chain tensioner this kit doesnt contain parts for the balance shafts please order that kit separately.
Xml's Blinklist.com
-
A production V - 8 crankshaft typically has six counterweights positioned at the front and rear of the crank.
-
We are still using the same bearing sizes, crankshaft design, and lifter bores that were debuted on the original big-block Chevy in 1965.
-
In addition, the car has a stock crankshaft and connecting rods, Hooker headers, and Mopar ignition.
-
William M. Clark, a retired businessman, generously provided a collection of engines, levers, pumps, axles, and crankshafts for us to display in boxlike frames.
-
Thanks!!! skechers stiletto sham titelist winter clothes for kids kobe2 akrid parabody shoos montrail insoles cardiff school ocala hospital hori hori raritan hazlet school innersoles callies crankshafts gardina flower how to change ball joints on a cadillac sts micro shs dental highspeed handpiece aquajogger and womens fitness system mom birthstone necklace - 2006-08-17 09: 19: 56
Home to Chaos
-
The flywheel drove a crankshaft which was connected by layshafts to the steam chests which operated the inlet and exhaust valves and were controlled by the governor.
-
All moving parts, apart from the plain-bearing crankshaft, use needle roller bearings to help it rev freely.
-
After all, who's likely to take an engine apart to examine what kind of bearings the crankshaft is rotating in?
-
Sizing the engine for its current displacement meant that the crankshaft lost four pounds, and could ride on smaller bearing journals.
-
Hollow rod journals are a real asset for a long-stroke crankshaft.
-
Has he ever listened to himself on the subject of crankshafts and big ends?
-
With a rotary engine, the crankshaft is fixed, while the cylinders, crankcase and all the other bits rotate around it.
-
The report by the Department of Transport's air accident investigation unit found that the engine stoppage was caused by failure of the crankshaft.
-
The camshaft is geared to turn at one-half the rate of the crankshaft.
-
It comes from some of the critical wear areas; for example, the liner of the piston area, the crankshaft, or the camshaft.
