How To Use Gunsmith In A Sentence
-
Hunter agreed with his own nod and took out his own revolver, a .45 caliber, long barrel, made custom by the town's gunsmith.
-
Hunter agreed with his own nod and took out his own revolver, a .45 caliber, long barrel, made custom by the town's gunsmith.
-
WMHunter; the old mod 70 trigger is one of the best made. they are easy to hone out the machine marks in the contact points and to adjust, and of 300+ that I have reworked, I have never had one returned, and one of them has been re barreled twice since I did the trigger. $40 to a competent gunsmith and you will have as good a trigger as you can buy.
Rifles of Interest, Vol. 1
-
At every halt of the wagons a shoemaker would be seen searching for a lapstone; a gunsmith would be mending a rifle, and weavers would be at their wheels or looms.
The Lions of the Lord A Tale of the Old West
-
Because no rifle - not even a match-tuned masterpiece of the gunsmith's art - can shoot off a rickety, wobbly bench.
-
In the 17th century, gunsmiths from Central Europe emigrated to the colony of Pennsylvania, and in their shops the jaeger began to evolve into a much smaller-calibered rifle.
Rifle That Made America
-
I have been a gunsmith/armorer for almost the same number of years and have brought a lot of folks into handloading.
How Handloading Can Improve Your Love Life
-
I would not fire it another time until I had it checked by a competent gunsmith, because that much headspace is a definate safety hazzard to the gun, you, and anyone standing nearby.
Paper Versus Meat
-
Gary Schlomer, educational supervisor of the Colorado School of Trades (one of the few places you can go to learn to be a gunsmith) says, A gunsmith is just a mechanic.
Who to Call When Your Rifle Needs Repair
-
Gunsmiths can be ex-machinists, ex-military armorers or other craftsmen who were gunsmithing at home as a hobby for their own entertainment and for friends.
-
His grandfather was a gunsmith who stimulated his interest in firearms at an early age.
-
Many of the books about hunting and shooting are how-to books, whether they cover hunting, gunsmithing or other shooting sports-related topics.
-
Even the owner is urged not to disassemble the Crossfire if there's a problem, but to have it serviced by the Customer Service Department, a trained armorer or qualified gunsmith.
-
If the gunsmiths like a product, Reid puts it into his inventory.
-
The first member of their family to settle in South Africa in 1679 was a gunsmith and many of his descendants have been involved in the gun trade.
-
Not only do we have the best firearms, we also have the best gunsmiths today.
-
The gunsmith would take a hacksaw and slice the front end off an old military slide, cut part of the front end off the customer's slide, square both pieces in the mill and then join the two with a good gas weld.
-
Both Wilson and his gunsmith, Larry Cooper, consulted with John Linebaugh, then had Cliff LaBounty rebore and Dave Adams rechamber the gun to another calibre.
-
This brings up another point, to wit: The gunsmith is not the 'secret' to accuracy as much as it may pain me to point this out.
Have We Hit The Wall?
-
In 1852, Horace Smith, a toolmaker, and Daniel Wesson, a former apprenticed gunsmith, combined their skills to produce a revolutionary handgun.
-
The new barrel should be chambered, blueprinted and floated by a gunsmith you know and trust.
When is a Rifle Not Accurate Enough?
-
Among the tribe, Bent earned a reputation as a gunsmith, taking powder from captured grenades and using animal tissue for cartridge paper to plump up ammunition stocks.
-
Some of us had a chance to beat on a hickory log to make basket splints, or watch gunsmithing, cabinetry, tinsmithing, pottery, printing, and many other trades.
-
As any gunsmith or S&W armorer can attest, these guns - like any semiautomatic pistol - require lubrication of their long bearing surfaces or they may be unable to cycle as designed.
-
It was not until the end of the colonial period that any sort of market existed to justify the regular importation of firearms by merchants, or their production by the few gunsmiths scattered through North America.
-
Yep, Del and Shane are right as usual, buddy said "headspace" that's why they (gunsmiths) need the whole rig to effect repairs, sorry for the delay (different time zones).
In years past I heard that if the bolt in your bolt action rifle breaks or busts at an inopportune time you cannot go borrow you
-
Reliable and durable yes, but 11/2 to 2 groups is the norm for the Model 70 unless you had it custom barrelled or gunsmithed.
Caliber of Model 70 Tested
-
Only a handful of gunsmiths have the ability to cut a tapered octagon barrel.
-
The jaeger was the creation of Central European gunsmiths: a flintlock with a heavy, octagonal, rifled barrel of .60 to .75 caliber; a set (double) trigger; and a walnut stock equipped with a distinctive "trap" in the side that was covered by a sliding plate.
Rifle That Made America
-
Study after study reveals a surprisingly low number of gunsmiths in early America.
-
Well I do most of my own gunsmithing, because finding a gunsmith worth his salt is a difficult proposition.
Some Peeves from a Gunsmith
-
Shortly after that article appeared, Bill went from gunsmith to gunmaker as he opened the doors of Texas Longhorn Arms.
-
Knowing what a gunsmith is and does (my father was one) I can say with some confedence.
Some Peeves from a Gunsmith
-
If there is a shortage of iron per say, then a gunsmith might not be able to meet the demand for fire-arms.
-
If you look at the Government Model pistols sold by custom gunsmiths and some major manufacturers, you'll find that most of them come with a full length guide rod installed.
-
His friend was Rattler, with whom he was billeted in a room above a gunsmith 's.
THE GOLDEN LION
-
Private gunsmiths produced this pattern under contract to the British military in the 1750s.
-
Keith is a qualified gunsmith with over 25 years experience, specializing in long-range practical rifles.
-
In 1999 I faxed that letter about sniping to some gunsmiths in London.
-
The effect this is having on small gunsmiths who make their living on the repair and customizing of guns is incalculable.
-
In addition to blasting gunk and feathers and other surprises out of firearms, gunsmiths routinely uncover hunters' hasty mistakes during major gun surgery.
-
Joreboam Hemelett was a gunsmith, and he must have had a touch of fire knackery because it was well known that no matter how damp a day it might be, the powder in a Hemelett gun always ignited.
Alvin Journeyman
-
I talked to the government, firearms dealers and gunsmiths, and read page after page of the rules and regulations that govern firearms shipping in the United States.
-
Born, raised, and educated just outside of London, Barraclough initially learned the art of engraving from a Master English gunsmith in the late 1940s.
-
If the rifle were my own I would have a gunsmith slick the trigger up a little.
-
The thieves gained entry to the gunsmiths by breaking into the New China Palace take-away next door and then smashing their way through the adjoining brick wall.
-
These ranged from gunsmiths to locksmiths, farriers, nailmakers, hoop makers, and shipsmiths.
-
Gunsmiths can be ex-machinists, ex-military armorers or other craftsmen who were gunsmithing at home as a hobby for their own entertainment and for friends.
-
After 1,000 rounds I'll take the piece to a gunsmith for a trigger job, and have him give the cylinder a once-over.
-
Yes | No | Report from slothman wrote 43 weeks 6 days ago might want to invest in a little gunsmithing work, like a custome recoil pad ... and possibly a muzzle brake. yes they can be ugly, but you dont want to get beat to pieces.
So my dad want to get me a .300? any suggestions?
-
If the hammer falls, a trip to the gunsmith is in order and the repair bill is not likely to be small.
-
They were gunsmiths and they are expecting a busy time ahead.
-
As any gunsmith or S&W armorer can attest, these guns - like any semiautomatic pistol - require lubrication of their long bearing surfaces or they may be unable to cycle as designed.
-
My father is a gunsmith, and I was raised in a house with firearms.
-
Even the owner is urged not to disassemble the Crossfire if there's a problem, but to have it serviced by the Customer Service Department, a trained armorer or qualified gunsmith.
-
Long ago, some unknown gunsmith drilled and tapped a rifle receiver ring to attach a sight base.
-
Today there are at least a dozen gunsmiths producing beautiful custom revolvers having the same combination of artistic and mechanical talents so necessary for everything to come together perfectly.
-
I ve been aroud guns my entire life,. and a few things that trickled down from the old gunsmith is that there is always exceptions to every rule.
The Great Barrel Break-In Fad
-
These special tools, called jigs and fixtures, make jobs easier and allow the gunsmith to turn out quality work, fast and efficiently.
-
My gunsmith, is a Jewel, was a Tool-Dye man for many years then decided to fiddle with guns.
What to Do With Your Gift From George W.
-
These ranged from gunsmiths to locksmiths, farriers, nailmakers, hoop makers, and shipsmiths.
-
Take gun-making: in the early part of the century, gunsmiths custom-made muskets to the specs of each buyer.
-
The gunsmith also believes a ban on imitation firearms and air pistols would only have an impact on respectable sports fans and have no effect on criminals.
-
I understand where a gunsmith is coming from and how fustrating it mimght be to hear such things but I must admit that I have been known to ask such things and say such statements.
Some Peeves from a Gunsmith
-
Dragunov, a former army gunsmith who had become a designer in Izhevsk, competed against another konstruktor, Aleksandr Konstantinov, to make a prototype.
The Gun
-
The FCA has negative implications for firearm owners, the tourism industry, the film industry, firearm dealers, gunsmiths, and the private security industry.
-
Now I have moved to an area where the only gunsmith is a Remington licensed smith whom I would barely classify as a gunsmith.
Some Peeves from a Gunsmith
