How To Use Gypsum board In A Sentence
-
The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
-
In a traditional barn, you won't find finishes like drywall or gypsum board.
-
Some rafter systems are not deep enough to accept fiberglass batting and/or even enough to attach a vapor barrier or support a finished wall of paneling or gypsum board.
-
In a traditional barn, you won't find finishes like drywall or gypsum board.
-
Thanks for your time! edit: i remember also coming across the word gypsum boards for these? but im not sure if they are gypsum boards
TALK @ PhilMusic.com - The Online Home of the Pinoy Musician
-
Dr. Reed points out that on the fourth floor one can observe extensive damage to the gypsum board once the eavestroughs that he designed to collect the water into a pail are taken off.
-
The defective drywall, also known as gypsum board, was imported from China from about 2004 until 2007 to fill a shortage during the housing boom.
Chinese Drywall Maker Says It Is in Talks With Builders
-
Cut through wallboard (gypsum board) with either a keyhole or reciprocating saw.
-
It can grow on material with a high cellulose and low nitrogen content, such as fiberboard, gypsum board, paper, dust, and lint.
-
An estimated 100,000 houses across the country, most built in 2006 and 2007, may be affected, based on the 500 million pounds of Chinese drywall — also known as plasterboard or gypsum board — believed to have entered the U.S. during that period.
The Prisoners of Drywall
-
The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
-
It can grow on material with a high cellulose and low nitrogen content, such as fiberboard, gypsum board, paper, dust, and lint.
-
Builders have been hit by a rash of lawsuits from homeowners, who complain that defective drywall, also known as gypsum board, imported from China during the housing boom is generating sulfurous odors, corrodes metal and, in some case, causes health problems.
Wallboard Exporter in Settlement With Beazer Over Costly Repairs
-
The floor is wood, the ceiling is gypsum board, and the walls are part plaster on masonry and part gypsum board on randomly spaced framing.
-
Some rafter systems are not deep enough to accept fiberglass batting and/or even enough to attach a vapor barrier or support a finished wall of paneling or gypsum board.
-
They should not be used to vacuum porous materials, such as gypsum board.
-
The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
-
We also like the fact that gypsum board area separation walls accommodate electrical and plumbing systems and we don't need to frame or fur.
-
In new construction, the vapor retarder facing should be installed with the facing placed down toward the ceiling gypsum board, except in hot humid climates where unfaced batts should be used.
