How To Use Hydraulic press In A Sentence
-
In this case the experiment involves using a hydraulic press to crush specimen cubes of the concrete, and measuring the pressure at which the cube breaks.
-
Now many propellers are keyless, so we install or remove a propeller by hydraulic pressure.
-
Therefore carries on the transformation in the original Qinchuan QCS 002 hydraulic pressure teaching laboratory bench foundation.
-
I retired because I had no hydraulic pressure, so I could not change down through the gears, which is why I went wide and had to use the run-off area.
-
the hydraulic press is an application of Pascal's law
-
He pressed the button to stop the hydraulic press as the helicopter came level with the doors.
ALASTAIR MCLEAN'S 'NIGHT WATCH'
-
With a hydraulic press having a piston O. 27 of a meter in diameter, it permits of effecting in ten minutes the extraction of the oil from 25 kilogrammes of colza seeds.
Scientific American Supplement, No. 358, November 11, 1882
-
Since the engine did not seize, windmilling hydraulics provided ample hydraulic pressure to the outboard spoilers, minimizing the control problem of an outboard engine being shut down.
-
The bypass control cylinders automatically bypassed the hydraulic fluid through the actuating cylinder when hydraulic pressure was lost.
-
During drilling a hollow steel core barrel with an inner rod with pointed tip was hammered into the sand by percussion and hydraulic pressure.
-
Therefore carries on the transformation in the original Qinchuan QCS 002 hydraulic pressure teaching laboratory bench foundation.
-
Steering is electro-hydraulic power assisted rack and pinion, with the electric motor modulating the hydraulic pressure in the system on the basis of steering wheel angular velocity and vehicle speed.
-
Therefore carries on the transformation in the original Qinchuan QCS 002 hydraulic pressure teaching laboratory bench foundation.
-
a heated hydraulic press was required for adhesion
-
A specialized type of hydraulic press is known as the ram press.
5. Semidry foaming
-
The hydroforming process forms a heated metal blank into a desired shape by means of hydraulic pressure.
-
The hydraulic press doesn't present the fire or safety hazard the implosive sleeve process does.
-
In the first response stage, the brake pads are placed on the brake disc and the hydraulic pressure increased without initiating braking.
-
In the Gweembe Valley, KIT designed dehulling equipment replaces the CECOCO equipment, and the UNATA spindle press replaces the hydraulic press.
3. Case Studies
-
`Drumbeat, did you copy, this is Rescue Romeo, we are inbound on one engine with hydraulic pressure falling.
LET NOT THE DEEP
-
The original profile of cam in hydraulic press's distributor is not proper, its pressure angle is excessive, so that the guide sleeve is broken.
-
The front security gates open and close using hydraulic pressure, which is more efficient and reliable than electricity.
-
Note especially that this effects offers a general and universal mechanism to freely tap energy from any source of continuing stress, whether the stress is due to magnetic force fields, magnetostatics, hydraulic pressure, mechanical stress, gas or fluid pressure, electrical force fields, electrostatics, etc.
Chapter 6
-
This idea was developed in 1820 by Thomas Burr, who produced a hydraulic press with a mandrel attached to the ram.
-
An aileron booster system used the main system hydraulic pressure to supplement the pilot's pressure on the control column.
-
Firefighters were able to use a hydraulic pressure expander to force the bars apart and pull him back into his apartment.
Six-Year Old Chinese Boy Saved From Plunging to His Death by His Ears | Impact Lab
-
A tungsten-carbide button with a reverse imprint of the rifling grooves is pulled through a blank by a hydraulic press.
Roll Out the Barrel
-
`Drumbeat, did you copy, this is Rescue Romeo, we are inbound on one engine with hydraulic pressure falling.
LET NOT THE DEEP
