How To Use Moldboard In A Sentence
-
ARS scientists, working with NRCS and universities, have done the research that has encouraged farmers to largely put away the moldboard plow and switch to conservation tillage on about 40 percent of U.S. planted acres.
-
Remove right side moldboard extensions and stow on moldboard.
-
Basic models, in which you adjust the moldboard and blade angle manually, can be used as a grader or a box blade for landscaping and ground preparation jobs.
-
Heavier plows with wheels, horizontal plowshares, and a moldboard were invented, which cut down on manual labor.
-
Effective erosion control is often achieved on flatter slopes by using a chisel plow, disk, or field cultivator instead of the moldboard plow.
-
A longer wheelbase permits a more aggressive moldboard angle for a given blade length than a shorter wheelbase does.
-
ARS scientists, working with NRCS and universities, have done the research that has encouraged farmers to largely put away the moldboard plow and switch to conservation tillage on about 40 percent of U.S. planted acres.
-
It measures the rotation of the moldboard as the operator rotates it to manage both his materials and the true slope of the cutting edge of the moldboard.
-
It measures the rotation of the moldboard as the operator rotates it to manage both his materials and the true slope of the cutting edge of the moldboard.
-
Where soil has been moldboard plowed, sample to the depth of tillage.
-
Heavier plows with wheels, horizontal plowshares, and a moldboard were invented, which cut down on manual labor.
-
This one has a 14-foot moldboard and 243 horsepower at the flywheel.
-
The cutting edge is recessed into the blade's moldboard to form a smooth surface that rolls material off of the blade for good spreading performance.
-
Remove right side moldboard extensions and stow on moldboard.
-
Inspect dirt in moldboards and spoil around blade for presence of mines.
-
After a quick pass with a chisel plow or moldboard plow, some trash will remain on the surface.
-
The grader features a 7-ft., six-way hydraulically controlled moldboard operated with switches mounted on the loader's steer levers for fingertip control.
-
Heavier plows with wheels, horizontal plowshares, and a moldboard were invented, which cut down on manual labor.
-
Where soil has been moldboard plowed, sample to the depth of tillage.
-
Conservation or reduced tillage systems do not involve moldboard plowing and maintain some previous crop residue on the soil surface.
-
We are doing a huge amount of moldboard plowing and would really like to replace some of these passes with something that builds rather than damages the soil.
-
The moldboard, which is positioned about halfway between the front axle and the pivot point of the rear tandem wheels, rises only about half an inch.
-
We store seed wheat in a wooden grainary, we shovel starter fertilizer into the drills by hand, and we still use a moldboard plow (that always shocks no-tillers that I visit).
-
Effective erosion control is often achieved on flatter slopes by using a chisel plow, disk, or field cultivator instead of the moldboard plow.
-
We still moldboard plow most of our corn and soybean ground, so we are busy getting that tillage done.
-
The scarcity of iron among the poorer folk delayed the adoption of the heavy plough with its iron share, wheels and moldboard, but it was known already in Carolingian times.
-
After a quick pass with a chisel plow or moldboard plow, some trash will remain on the surface.
-
The cutting edge is recessed into the blade's moldboard to form a smooth surface that rolls material off of the blade for good spreading performance.
-
Heavier plows with wheels, horizontal plowshares, and a moldboard were invented, which cut down on manual labor.
-
In six-wheel drive, all six wheels are powered to grip the ground in poor footing and add an extra 8,500 lb. of pull in front of the moldboard, a practical function for clearing wet ditches and working on bank slopes.
-
He then assists the loader in clearing away excess dirt from moldboards.
-
Inspect dirt in moldboards and spoil around blade for presence of mines.
-
This one has a 14-foot moldboard and 243 horsepower at the flywheel.
-
Both use laser-equipped Bobcat graders, which feature a 7-ft., six-way, hydraulically controlled moldboard.
-
We still moldboard plow most of our corn and soybean ground, so we are busy getting that tillage done.
-
As a result, the yield potentials of such soils are usually higher under no-till or ridge tillage than under moldboard plowing.
-
Basic models, in which you adjust the moldboard and blade angle manually, can be used as a grader or a box blade for landscaping and ground preparation jobs.
-
This one has a 14-foot moldboard and 243 horsepower at the flywheel.
-
We store seed wheat in a wooden grainary, we shovel starter fertilizer into the drills by hand, and we still use a moldboard plow (that always shocks no-tillers that I visit).
-
In six-wheel drive, all six wheels are powered to grip the ground in poor footing and add an extra 8,500 lb. of pull in front of the moldboard, a practical function for clearing wet ditches and working on bank slopes.
-
We are doing a huge amount of moldboard plowing and would really like to replace some of these passes with something that builds rather than damages the soil.
-
The scarcity of iron among the poorer folk delayed the adoption of the heavy plough with its iron share, wheels and moldboard, but it was known already in Carolingian times.
-
Conservation or reduced tillage systems do not involve moldboard plowing and maintain some previous crop residue on the soil surface.
